源码网商城,靠谱的源码在线交易网站 我的订单 购物车 帮助

源码网商城

Nginx服务器搭建反向代理全攻略

  • 时间:2022-03-10 00:15 编辑: 来源: 阅读:
  • 扫一扫,手机访问
摘要:Nginx服务器搭建反向代理全攻略
Nginx反向代理有不少需要我们解决的问题,其中有不少问题是基于安装上的问题,在安装完成后的相关调试也让很多人头疼不已。下面就向大家介绍有关于安装和调试的相关介绍。 由于服务器apache抗不住目前的并发.加上前端squid配置后,问题依然无法解决.而页面程序大部分是动态.无法使用fastcgi来处理.因此想使用Nginx反向代理apache.整个配置安装过程很简单.在考虑高并发的情况下,在安装前就做了些优化.目前配置能抗住3000以上并发.好像不是特别大哦?呵~~ 但足以~~ 只是还有少量499问题..期待有人跟我讨论解决. [b]第1部分:安装[/b] [b]1 建立用户及组[/b]
  /usr/sbin/groupadd www 
  /usr/sbin/useradd -g www www 

[b]2 安装pcre 让Nginx反向代理支持rewrite 方便以后所需 [/b]
  wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-7.8.tar.gz 
  tar zxvf pcre-7.8.tar.gz 
  cd pcre-7.8/ 
  ./configure 
  make && make install 

3 安装Nginx反向代理
  wget http://sysoev.ru/nginx/nginx-0.7.58.tar.gz 
  tar zxvf nginx-0.7.58.tar.gz 
  cd nginx-0.7.58/ 
  ./configure --user=www --group=www --prefix=/usr/
  local/webserver/nginx --with-http_stub_status_module 
  --with-http_ssl_module --with-cc-opt='-O2' --with-cpu-opt
  =opteron 
  make && make install 

注意上文中的--with-cc-opt='-O2' --with-cpu-opt=opteron 这是编译器优化,目前最常用的是-02 而不是3.后面对应CPU的型号。 [b]第2部分:配置及优化配置文件[/b] [b]1 Nginx.conf 配置文件:[/b]
  user www www; 
  worker_processes 4; 
  # [ debug | info | notice | warn | error | crit ] 
  error_log /usr/local/webserver/nginx/logs/nginx_error.log crit; 
  pid /usr/local/webserver/nginx/nginx.pid; 
  #Specifies the value for maximum file descriptors that 
  can be opened by this process. 
  worker_rlimit_nofile 51200; 
  events 
  { 
  use epoll; 
  worker_connections 51200; 
  } 
  http 
  { 
  include mime.types; 
  default_type application/octet-stream; 
  source_charset GB2312; 
  server_names_hash_bucket_size 256; 
  client_header_buffer_size 256k; 
  large_client_header_buffers 4 256k; 
  #size limits 
  client_max_body_size 50m; 
  client_body_buffer_size 256k; 
  client_header_timeout 3m; 
  client_body_timeout 3m; 
  send_timeout 3m; 
  #参数都有所调整.目的是解决代理过程中出现的一些502 499错误  
  sendfile on; 
  tcp_nopush on; 
  keepalive_timeout 120; #参数加大,以解决做代理时502错误 
  tcp_nodelay on; 
  include vhosts/upstream.conf; 
  include vhosts/bbs.linuxtone.conf;  
  } 

[b]2 upstream.conf 配置文件(这也是做负载的配置方法[/b]
  upstream.conf 
  upstream bbs.linuxtone.com { 
  server 192.168.1.4:8099; 
  } 

[b]3 站点配置文件[/b]
  bbs.linuxtone.conf 
  server 
  { 
  listen 80; 
  server_name bbs.linuxtone.conf; 
  charset GB2312; 
  index index.html index.htm; 
  root /date/wwwroot/linuxtone/; 
  location ~ ^/NginxStatus/ { 
  stub_status on; 
  access_log off; 
  } 
  location / { 
  root /date/wwwroot/linuxtone/; 
  proxy_redirect off ; 
  proxy_set_header Host $host; 
  proxy_set_header X-Real-IP $remote_addr; 
  proxy_set_header REMOTE-HOST $remote_addr; 
  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; 
  client_max_body_size 50m; 
  client_body_buffer_size 256k; 
  proxy_connect_timeout 30; 
  proxy_send_timeout 30; 
  proxy_read_timeout 60; 
  proxy_buffer_size 256k; 
  proxy_buffers 4 256k; 
  proxy_busy_buffers_size 256k; 
  proxy_temp_file_write_size 256k; 
  proxy_next_upstream error timeout invalid_header http_500 
  http_503 http_404; 
  proxy_max_temp_file_size 128m; 
  proxy_pass http://bbs.linuxtone.com; 
  } 

参数都有所调整.目的是解决代理过程中出现的一些502 499错误
  #Add expires header for static content 
  location ~* \.(jpg|jpeg|gif|png|swf)$ { 
  if (-f $request_filename) { 
  root /date/wwwroot/linuxtone/; 
  expires 1d; 
  break; 
  } 
  } 
  log_format access '$remote_addr - $remote_user [$time_local] "$request" ' 
  '$status $body_bytes_sent "$http_referer" ' 
  '"$http_user_agent" $http_x_forwarded_for'; 
  access_log /exp/nginxlogs/bbs.linuxtone_access.log access; 
  } 

[b]常用指令 [/b]下面来看一些Nginx的反向代理常用指令 [b]proxy_pass指令 [/b]语法
  proxy_pass  [url | upstream] 

作用 该指令用于设置被代理服务器端口或套接字,以及URL [b]proxy_redirect指令 [/b]语法
  proxy_redirect  [off | default | redirect replacement] 

作用 该指令用于更改被代理服务器的应答Header头中的"location"和"refresh" 补充: 这个命令作用我还没掌握,实际设置中都是off的,各位如果有了解的,欢迎博客下留言指导我 [b]proxy_next_upstream指令 [/b]语法
 
[u]复制代码[/u] 代码如下:
proxy_next_upstream [error|timeout|invalid_header|http_500|http_502|http_503|http_504|http_404|off]
作用 该指令用于设置当在哪种情况下,将请求转发到下一台服务器。在upstream负载均衡代理服务器池中,假设后端的一台服务器无法访问或返回指定错误响应代码时,可以使用该指令将请求转发到池中的下一台服务器。 参数说明     error : 如果连接服务器时、发送请求时、读取应答消息时发生错误      timeout : 如果连接服务器时、传递请求时、读取后端服务器应答消息时超时      invalid_header : 后端服务器返回一个空的或错误的应答      http_[500|502|503|504|404] : 后端服务器返回指定的应答状态码      off : 禁止将请求转发到下一台后端服务器  [b] proxy_set_header指令 [/b]语法
  proxy_set_header header value 

作用 该指令允许重新定义或添加header行到转发给被代理服务器的请求信息中,它的值可以是文本,可以是变量,可以是文本和变量的组合
  • 全部评论(0)
联系客服
客服电话:
400-000-3129
微信版

扫一扫进微信版
返回顶部