当前位置：首页 > 资讯 > 技术文档

mongodb 3.2.5安装详细过程

时间：2020-01-18 09:45 编辑：来源：阅读：
扫一扫，手机访问

摘要：mongodb 3.2.5安装详细过程

[b]1. 准备安装介质[/b] 安装介质下载： mongodb的安装方式，我通常使用二进制包的方式，内网不能配置连接外网的yum源；官方建议的mongodb下载地址为： Downloads.mongodb.org 但实际上，这个地址，很难找到下载表，正常下载，通常可以用下面的下载地址选择下载： [url=https://www.mongodb.org/dl/linux/x86_64]https://www.mongodb.org/dl/linux/x86_64[/url] 我这里下载的是： 3.2.5 版本对应的 mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8.tgz 如果将整个mongodb安装过程已经编写了脚本，可以获取安装脚本，用脚本执行安装；如果手动安装，则可跳过此步；手工安装mongodb的脚步的执行过程，一般如下：

mkdir -p /root/{software,scripts}
wget -q http://ptmaster.test.cn/files/init/mongodb_install.sh -O /root/scripts/mongodb_install.sh
cd /root/scripts
./mongodb_install.sh -p 27117

[b]2. 添加mongodb用户和环境变量，修改系统设置[/b] 添加用户：

groupadd mongodb 
useradd -g mongodb mongodb

创建mongodb脚本目录

mkdir -p /home/mongodb/scripts/

修改目录权限：

chown -R mongodb:mongodb /home/mongodb/scripts/

在 /etc/profile 中添加 mongodb 用户的环境变量：

# MongoDB Environment Variables
export PATH=$PATH:$HOME/bin:/usr/local/mongodb/bin:/home/mongodb/scripts/

是上面的变量生效： source /etc/profile 实际操作过程如下：

[root@yq-mapp-otadb248 etc]# id mongodb 
id: mongodb: No such user 
[root@yq-mapp-otadb248 etc]# 
[root@yq-mapp-otadb248 etc]# 
[root@yq-mapp-otadb248 etc]# groupadd mongodb 
useradd -g mongodb mongodb[root@yq-mapp-otadb248 etc]# useradd -g mongodb mongodb 
[root@yq-mapp-otadb248 etc]# 
[root@yq-mapp-otadb248 etc]# 
[root@yq-mapp-otadb248 etc]# id mongodb 
uid=801(mongodb) gid=801(mongodb) groups=801(mongodb) 
[root@yq-mapp-otadb248 etc]#

mongodb要求hugepage设置为禁用，soft limit设置足够大，可以在一开始修改，也可以到后面修改；

cat /etc/security/limits.d/90-nproc.conf

修改这个文件中下列的值

* soft nproc 2048

确保： soft nproc 的值至少是 soft nofile 值的一半；修改后，退出当前用户，重新进入一下，设置就可以生效了；禁用 hugepage 的值：

# echo "never" > /sys/kernel/mm/transparent_hugepage/enabled
# echo "never" > /sys/kernel/mm/transparent_hugepage/defrag

备注：上面两个警告，现在不修改也不影响安装过程，后面会提示。 [b]3. 安装mongodb软件[/b] 上传并解压软件：

cd /usr/local
rz mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8.tgz
tar -zxvf mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8.tgz
ln -sv mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 /usr/local/mongodb

修改文件权限：

chown -R mongodb:mongodb mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8
chown -R mongodb:mongodb /usr/local/mongodb

实际操作过程如下：

[root@yq-mapp-otadb248 src]# rz 
rz waiting to receive. 
Starting zmodem transfer. Press Ctrl+C to cancel. 
Transferring mongodb-linux-x86_64-rhel62-3.2.5.tar.gz... 
100% 66999 KB 16749 KB/sec 00:00:04 0 Errors 

[root@yq-mapp-otadb248 src]# ll 
total 277792 
-rw-r--r-- 1 root root 68607629 Oct 19 11:53 mongodb-linux-x86_64-rhel62-3.2.5.tar.gz 
-rw-r--r-- 1 root root 215848960 Apr 19 2016 mongodb-linux-x86_64-rhel62-v3.2-latest 
[root@yq-mapp-otadb248 src]# 
[root@yq-mapp-otadb248 src]# tar -zxvf mongodb-linux-x86_64-rhel62-3.2.5.tar.gz 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/ 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongooplog 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongod 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongo 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongofiles 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/bsondump 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongorestore 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongos 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongoexport 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongodump 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongoimport 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongotop 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongostat 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/bin/mongoperf 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/GNU-AGPL-3.0 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/MPL-2 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/README 
mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8/THIRD-PARTY-NOTICES 
[root@yq-mapp-otadb248 src]# 
[root@yq-mapp-otadb248 src]# ll 
total 277796 
drwxr-xr-x 3 root root 4096 Oct 19 11:54 mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 
-rw-r--r-- 1 root root 68607629 Oct 19 11:53 mongodb-linux-x86_64-rhel62-3.2.5.tar.gz 
-rw-r--r-- 1 root root 215848960 Apr 19 2016 mongodb-linux-x86_64-rhel62-v3.2-latest 
[root@yq-mapp-otadb248 src]# 
[root@yq-mapp-otadb248 src]# mv mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 ../ 
[root@yq-mapp-otadb248 src]# cd .. 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# ln -sv mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 /usr/local/mongodb 
`/usr/local/mongodb' -> `mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8' 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# chown -R mongodb:mongodb mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 
[root@yq-mapp-otadb248 local]# chown -R mongodb:mongodb /usr/local/mongodb 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# ll 
total 52 
drwxr-xr-x. 2 root root 4096 Apr 24 2014 bin 
drwxr-xr-x. 2 root root 4096 Sep 23 2011 etc 
drwxr-xr-x. 2 root root 4096 Sep 23 2011 games 
drwxr-xr-x. 2 root root 4096 Sep 23 2011 include 
drwxr-xr-x. 2 root root 4096 Sep 23 2011 lib 
drwxr-xr-x. 3 root root 4096 Apr 25 2014 lib64 
drwxr-xr-x. 2 root root 4096 Sep 23 2011 libexec 
lrwxrwxrwx 1 root root 25 Mar 6 2015 logstash -> /usr/local/logstash-1.4.2 
drwxrwxr-x 8 logstash logstash 4096 Jun 24 2014 logstash-1.4.2 
lrwxrwxrwx 1 mongodb mongodb 45 Oct 19 11:59 mongodb -> mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 
drwxr-xr-x 3 mongodb mongodb 4096 Oct 19 11:54 mongodb-linux-x86_64-rhel62-3.2.5-20-g07e21d8 
lrwxrwxrwx 1 root root 39 Apr 23 2014 mysql -> /usr/local/mysql-5.5.19-linux2.6-x86_64 
drwxr-xr-x 12 root mysql 4096 Apr 23 2014 mysql-5.5.19-linux2.6-x86_64 
drwxr-xr-x. 2 root root 4096 Sep 23 2011 sbin 
drwxr-xr-x. 6 root root 4096 Apr 25 2014 share 
drwxr-xr-x. 2 root root 4096 Oct 19 11:54 src 
[root@yq-mapp-otadb248 local]#

[b]4. 创建mongodb实例所需的目录和配置文件[/b] 创建mongodb实例所需目录：

mkdir -p /data/mongo_27117/{db,log,tmp}

创建mongodb实例配置文件所需目录和文件：

mkdir -p /etc/mongodb
touch /etc/mongodb/mongo_27117.conf

根据需要配置mongodb的启动参数，我的启动参数配置内容如下： vim /etc/mongodb/mongo_27117.conf

dbpath=/data/mongo_27117/db 
logpath=/data/mongo_27117/log/mongo_27117.log 
pidfilepath = /data/mongo_27117/tmp/mongo_27117.pid 
storageEngine = wiredTiger 
wiredTigerCacheSizeGB = 2 
syncdelay = 30 
wiredTigerCollectionBlockCompressor = zlib 
port=27117 
auth = true 
directoryperdb = true 
oplogSize=2048 
logappend=true 
fork=true 
#rest=true 
journal = true 
journalCommitInterval = 50 
slowms = 200

修改目录、文件的权限和属组：

chown -R mongodb:mongodb /data/mongo_27117/
chown -R mongodb:mongodb /etc/mongodb

确认目录和配置文件都已经准备完毕：

ls -l /data/mongo_27117/
ls -l /etc/mongodb
cat /etc/mongodb/mongo_27117.conf

该步骤实际操作过程如下：

[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# mkdir -p /data/mongo_27117/{db,log,tmp} 
[root@yq-mapp-otadb248 local]# mkdir -p /etc/mongodb 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# vim /etc/mongodb/mongo_27117.conf 
dbpath=/data/mongo_27117/db 
logpath=/data/mongo_27117/log/mongo_27117.log 
pidfilepath = /data/mongo_27117/tmp/mongo_27117.pid 
storageEngine = wiredTiger 
wiredTigerCacheSizeGB = 2 
syncdelay = 30 
wiredTigerCollectionBlockCompressor = zlib 
port=27117 
auth = true 
directoryperdb = true 
oplogSize=2048 
logappend=true 
fork=true 
#rest=true 
journal = true 
journalCommitInterval = 50 
slowms = 200 
~ 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# chown -R mongodb:mongodb /data/mongo_27117/ 
[root@yq-mapp-otadb248 local]# chown -R mongodb:mongodb /etc/mongodb 
[root@yq-mapp-otadb248 local]# ls -l /data/mongo_27117/ 
total 12 
drwxr-xr-x 2 mongodb mongodb 4096 Oct 19 12:02 db 
drwxr-xr-x 2 mongodb mongodb 4096 Oct 19 12:02 log 
drwxr-xr-x 2 mongodb mongodb 4096 Oct 19 12:02 tmp 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# ls -l /etc/mongodb 
total 4 
-rw-r--r-- 1 mongodb mongodb 392 Oct 19 12:05 mongo_27117.conf 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# cat /etc/mongodb/mongo_27117.conf 
dbpath=/data/mongo_27117/db 
logpath=/data/mongo_27117/log/mongo_27117.log 
pidfilepath = /data/mongo_27117/tmp/mongo_27117.pid 
storageEngine = wiredTiger 
wiredTigerCacheSizeGB = 2 
syncdelay = 30 
wiredTigerCollectionBlockCompressor = zlib 
port=27117 
auth = true 
directoryperdb = true 
oplogSize=2048 
logappend=true 
fork=true 
#rest=true 
journal = true 
journalCommitInterval = 50 
slowms = 200

[b]5. 启动mongodb实例，修改管理员密码[/b] 使用下面的命令启动mongodb服务：

/usr/local/mongodb/bin/mongod --config /etc/mongodb/mongo_27117.conf

确认密码，mongodb的管理员密码，可以根据各自的规则设置：

echo $MONGODB_ROOT_PASS
mongodb_020248_Pass

修改管理员密码，注意 mongodb 3.2要对admin授予三个角色，这点与之前的版本不同：

/usr/local/mongodb/bin/mongo --port=27117
db.createUser({user:'useradmin',pwd:'mongodb_020248_Pass',roles:[ { "role" : "clusterAdmin", "db" : "admin" }, { "role" : "userAdminAnyDatabase", "db" : "admin" }, { "role" : "dbAdminAnyDatabase", "db" : "admin" } ] })
db.auth("useradmin","mongodb_020248_Pass")
db.system.users.find();

生成密码后,使用新用户和密码登陆mongo,确认状态：

/usr/local/mongodb/bin/mongo --port=27117 -u useradmin -p mongodb_020248_Pass --authenticationDatabase admin

该步骤操作过程如下；

[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# ps -ef|grep mongo 
root 32295 30115 0 12:12 pts/0 00:00:00 grep mongo 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# /usr/local/mongodb/bin/mongod --config /etc/mongodb/mongo_27117.conf 
about to fork child process, waiting until server is ready for connections. 
forked process: 32321 
child process started successfully, parent exiting 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# ps -ef|grep mongo 
root 32321 1 1 12:12 ? 00:00:00 /usr/local/mongodb/bin/mongod --config /etc/mongodb/mongo_27117.conf 
root 32359 30115 0 12:13 pts/0 00:00:00 grep mongo 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# /usr/local/mongodb/bin/mongo --port=27117 
MongoDB shell version: 3.2.5-20-g07e21d8 
connecting to: 127.0.0.1:27117/test 
Welcome to the MongoDB shell. 
For interactive help, type "help". 
For more comprehensive documentation, see 
http://docs.mongodb.org/ 
Questions? Try the support group 
http://groups.google.com/group/mongodb-user 
> 
> use admin; 
switched to db admin 
> db.system.users.find(); 
Error: error: { 
"ok" : 0, 
"errmsg" : "not authorized on admin to execute command { find: \"system.users\", filter: {} }", 
"code" : 13 
} 
> 
> db.createUser({user:'useradmin',pwd:'mongodb_020248_@JJMatch',roles:[ { "role" : "clusterAdmin", "db" : "admin" }, { "role" : "userAdminAnyDatabase", "db" : "admin" }, { "role" : "dbAdminAnyDatabase", "db" : "admin" } ] }) 
Successfully added user: { 
"user" : "useradmin", 
"roles" : [ 
{ 
"role" : "clusterAdmin", 
"db" : "admin" 
}, 
{ 
"role" : "userAdminAnyDatabase", 
"db" : "admin" 
}, 
{ 
"role" : "dbAdminAnyDatabase", 
"db" : "admin" 
} 
] 
} 
> 
> db.system.users.find(); 
Error: error: { 
"ok" : 0, 
"errmsg" : "not authorized on admin to execute command { find: \"system.users\", filter: {} }", 
"code" : 13 
} 
> 
> db.auth("useradmin","mongodb_020248_@JJMatch") 
1 
> 
> db.system.users.find(); 
{ "_id" : "admin.useradmin", "user" : "useradmin", "db" : "admin", "credentials" : { "SCRAM-SHA-1" : { "iterationCount" : 10000, "salt" : "6hLx/d97hS+yfoN47QTmXQ==", "storedKey" : "B0PqwVs3GFKIHQyyQ6mBp1MA370=", "serverKey" : "xK53AKKAvFCdn5rsEtij5QB9RtU=" } }, "roles" : [ { "role" : "clusterAdmin", "db" : "admin" }, { "role" : "userAdminAnyDatabase", "db" : "admin" }, { "role" : "dbAdminAnyDatabase", "db" : "admin" } ] } 
> 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# /usr/local/mongodb/bin/mongo --port=27117 -u useradmin -p mongodb_020248_@JJMatch --authenticationDatabase admin 
MongoDB shell version: 3.2.5-20-g07e21d8 
connecting to: 127.0.0.1:27117/test 
Server has startup warnings: 
2016-10-19T12:12:59.096+0800 I CONTROL [initandlisten] 
2016-10-19T12:12:59.096+0800 I CONTROL [initandlisten] ** WARNING: The server was started without specifying a --bind_ip 
2016-10-19T12:12:59.096+0800 I CONTROL [initandlisten] ** and listens for connections on all available network interfaces. 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: You are running this process as the root user, which is not recommended. 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: /sys/kernel/mm/transparent_hugepage/enabled is 'always'. 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** We suggest setting it to 'never' 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: /sys/kernel/mm/transparent_hugepage/defrag is 'always'. 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** We suggest setting it to 'never' 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: soft rlimits too low. rlimits set to 2048 processes, 8192 files. Number of processes should be at least 4096 : 0.5 times number of files. 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] 
> 
> use admin; 
switched to db admin 
> 
> db.system.users.find(); 
{ "_id" : "admin.useradmin", "user" : "useradmin", "db" : "admin", "credentials" : { "SCRAM-SHA-1" : { "iterationCount" : 10000, "salt" : "6hLx/d97hS+yfoN47QTmXQ==", "storedKey" : "B0PqwVs3GFKIHQyyQ6mBp1MA370=", "serverKey" : "xK53AKKAvFCdn5rsEtij5QB9RtU=" } }, "roles" : [ { "role" : "clusterAdmin", "db" : "admin" }, { "role" : "userAdminAnyDatabase", "db" : "admin" }, { "role" : "dbAdminAnyDatabase", "db" : "admin" } ] 
> 
>

[b]6. 为应用创建业务账号[/b] 创建一个 admin / admin 用户，具有可以自行创建用户和数据库的权限，密码业务自己再修改：

db.createUser({user:'admin',pwd:'admin',roles:[{role:'userAdminAnyDatabase',db:'admin'},{role:'dbAdminAnyDatabase',db:'admin'}]})

验证业务账号登陆：

/usr/local/mongodb/bin/mongo --port=27117 -u admin -p admin --authenticationDatabase admin

该步骤，实际操作过程如下：

> 
> db.system.users.find().pretty() 
{ 
"_id" : "admin.useradmin", 
"user" : "useradmin", 
"db" : "admin", 
"credentials" : { 
"SCRAM-SHA-1" : { 
"iterationCount" : 10000, 
"salt" : "6hLx/d97hS+yfoN47QTmXQ==", 
"storedKey" : "B0PqwVs3GFKIHQyyQ6mBp1MA370=", 
"serverKey" : "xK53AKKAvFCdn5rsEtij5QB9RtU=" 
} 
}, 
"roles" : [ 
{ 
"role" : "clusterAdmin", 
"db" : "admin" 
}, 
{ 
"role" : "userAdminAnyDatabase", 
"db" : "admin" 
}, 
{ 
"role" : "dbAdminAnyDatabase", 
"db" : "admin" 
} 
] 
} 
{ 
"_id" : "admin.admin", 
"user" : "admin", 
"db" : "admin", 
"credentials" : { 
"SCRAM-SHA-1" : { 
"iterationCount" : 10000, 
"salt" : "snlJe16a2PX3dSwxnOsfAw==", 
"storedKey" : "VOoX1e7F0tOme6YuR+iyMLuEWK8=", 
"serverKey" : "aSlpI7TzlyJ5Ccbd8GoptNB8khk=" 
} 
}, 
"roles" : [ 
{ 
"role" : "userAdminAnyDatabase", 
"db" : "admin" 
}, 
{ 
"role" : "dbAdminAnyDatabase", 
"db" : "admin" 
} 
] 
} 
> 
> ^C 
bye 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# 
[root@yq-mapp-otadb248 local]# /usr/local/mongodb/bin/mongo --port=27117 -u admin -p admin --authenticationDatabase admin 
MongoDB shell version: 3.2.5-20-g07e21d8 
connecting to: 127.0.0.1:27117/test 
> 
> show dbs 
admin 0.000GB 
local 0.000GB 
> 
>

[b]7. 实例启动时的报警处理[/b] 在mongodb启动过程中，有时会提示一些警告，其中常见的两类警告处理过程如下：警告1：提示： 2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: soft rlimits too low. rlimits set to 2048 processes, 8192 files. Number of processes should be at least 4096 : 0.5 times number of files. 处理方式，根据提示，将 processes 值，由现在的 2048，修改为4096，甚至更高的值。

ps -ef|grep mongod
cat /proc/32321/limits
cat /etc/security/limits.d/90-nproc.conf 
vim /etc/security/limits.d/90-nproc.conf

该步骤实际操作过程如下：

[root@yq-mapp-otadb248 limits.d]# 
[root@yq-mapp-otadb248 limits.d]# cat /etc/security/limits.d/90-nproc.conf 
# 20160621 limit?? 
#* soft nproc 51200 
#* hard nproc 51200 
* soft nproc 2048 
* hard nproc 16384 
* soft nofile 8192 
* hard nofile 8192 
* soft stack 8192 
* hard stack 8192 
* soft memlock unlimited 
* hard memlock unlimited 
[root@yq-mapp-otadb248 limits.d]# vim /etc/security/limits.d/90-nproc.conf 
# 20160621 
#* soft nproc 51200 
#* hard nproc 51200 
* soft nproc 8192 
* hard nproc 16384 
[root@yq-mapp-otadb248 ~]# 
[root@yq-mapp-otadb248 ~]# ulimt -a 
-bash: ulimt: command not found 
[root@yq-mapp-otadb248 ~]# ulimit -a 
core file size (blocks, -c) 0 
data seg size (kbytes, -d) unlimited 
scheduling priority (-e) 0 
file size (blocks, -f) unlimited 
pending signals (-i) 30422 
max locked memory (kbytes, -l) unlimited 
max memory size (kbytes, -m) unlimited 
open files (-n) 8192 
pipe size (512 bytes, -p) 8 
POSIX message queues (bytes, -q) 819200 
real-time priority (-r) 0 
stack size (kbytes, -s) 8192 
cpu time (seconds, -t) unlimited 
max user processes (-u) 8192 
virtual memory (kbytes, -v) unlimited 
file locks (-x) unlimited

警告2：

2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: /sys/kernel/mm/transparent_hugepage/enabled is 'always'.
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** We suggest setting it to 'never'
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] 
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** WARNING: /sys/kernel/mm/transparent_hugepage/defrag is 'always'.
2016-10-19T12:12:59.097+0800 I CONTROL [initandlisten] ** We suggest setting it to 'never'

确认：

cat /sys/kernel/mm/transparent_hugepage/enabled
cat /sys/kernel/mm/transparent_hugepage/defrag

处理：

echo "never" > /sys/kernel/mm/transparent_hugepage/enabled
echo "never" > /sys/kernel/mm/transparent_hugepage/defrag

该步骤，实际操作过程如下：

[root@yq-mapp-otadb248 limits.d]# cat /sys/kernel/mm/transparent_hugepage/enabled 
[always] madvise never 
[root@yq-mapp-otadb248 limits.d]# cat /sys/kernel/mm/transparent_hugepage/defrag 
[always] madvise never 
[root@yq-mapp-otadb248 limits.d]# 
[root@yq-mapp-otadb248 limits.d]# echo "never" > /sys/kernel/mm/transparent_hugepage/enabled 
[root@yq-mapp-otadb248 limits.d]# echo "never" > /sys/kernel/mm/transparent_hugepage/defrag 
[root@yq-mapp-otadb248 limits.d]# 
[root@yq-mapp-otadb248 limits.d]# cat /sys/kernel/mm/transparent_hugepage/enabled 
always madvise [never] 
[root@yq-mapp-otadb248 limits.d]# cat /sys/kernel/mm/transparent_hugepage/defrag 
always madvise [never] 
[root@yq-mapp-otadb248 limits.d]# 
[root@yq-mapp-otadb248 limits.d]#

[b]8. 创建mongodb实例服务管理脚本[/b] 为了方便对mongodb实例的启动和停止，可以先创建mongodb的启动脚本，停止脚本，然后在 /etc/init.d/ 目录下创建一个服务脚本，这样就可以用 service 进行实例管理了。 [b]脚本1：启动脚本：[/b] vim /home/mongodb/scripts/mongodb_start.sh

#!/bin/sh 
# the scripts is used to start mongodb instance with port 27117. 
# created by zhaofx on 20161019. 
echo -n "Starting MongoDB port 27117 ... " 
/usr/local/mongodb/bin/mongod --config /etc/mongodb/mongo_27117.conf &

[b]脚本二：停止脚本：[/b] vim /home/mongodb/scripts/mongodb_stop.sh

#!/bin/bash 
# the scripts is used to stop mongodb instance with port 27117. 
# created by zhaofx on 20161019. 
echo -n "Stopping MongoDB port 27117" 
pid=`ps -o pid,command ax | grep mongod | awk '!/awk/ && !/grep/ {print $1}'`; 
if [ "${pid}" != "" ]; then 
kill -2 ${pid}; 
fi

脚本三：服务脚本： vim /etc/init.d/mongodb

vim /etc/init.d/mongodb 
#! /bin/sh 
# the scripts is used to mange mongodb service with linux service type. 
# created by zhaofx on 20161019. 
PATH=/usr/local/mongodb/bin:/sbin:/bin:/usr/sbin:/usr/bin 
NAME=mongodb 
start(){ 
/home/mongodb/scripts/mongodb_start.sh 
} 
stop(){ 
/home/mongodb/scripts/mongodb_stop.sh 
} 
test -x $DAEMON || exit 0 
set -e 
case "$1" in 
start) 
start 
;; 
stop) 
stop 
;; 
*) 
N=/etc/init.d/$NAME 
echo "Usage: $N {start|stop}" >&2 
exit 1 
;; 
esac 
exit 0

修改脚本的属组，添加执行权限：

chown -R mongodb:mongodb /home/mongodb/scripts/ 
chown mongodb:mongodb /etc/init.d/mongodb 
chmod +x /home/mongodb/scripts/mongodb_start.sh 
chmod +x /home/mongodb/scripts/mongodb_stop.sh 
chmod +x /etc/init.d/mongodb

最后服务启动和停止mongodb实例的过程为：

[root@yq-mapp-otadb248 ~]# 
[root@yq-mapp-otadb248 ~]# service mongodb stop 
Stopping MongoDB port 27117 
[root@yq-mapp-otadb248 ~]# 
[root@yq-mapp-otadb248 ~]# 
[root@yq-mapp-otadb248 ~]# 
[root@yq-mapp-otadb248 ~]# service mongodb start 
Starting MongoDB port 27117 ... [root@yq-mapp-otadb248 ~] 
about to fork child process, waiting until server is ready for connections. 
forked process: 36088 
child process started successfully, parent exiting 
[root@yq-mapp-otadb248 ~]#

以上所述是小编给大家介绍的mongodb 3.2.5安装过程详细记录，希望对大家有所帮助，如果大家有任何疑问请给我留言，小编会及时回复大家的。在此也非常感谢大家对编程素材网网站的支持！

全部评论(0)

上一篇：mongodb分片技术_动力节点Java学院整理
下一篇：MongoDB db.serverStatus()输出内容中文注释

资讯排行榜
更多>>