源码网商城,靠谱的源码在线交易网站 我的订单 购物车 帮助

源码网商城

Cisco NAT 配置

  • 时间:2021-08-16 07:03 编辑: 来源: 阅读:
  • 扫一扫,手机访问
摘要:Cisco NAT 配置
Inside network:   3.3.3.4   (static to 2.2.2.24 outside)   3.3.3.5   (static to 2.2.2.25 outside)   |   |   |   3.3.3.1 (ethernet 0)   Router - the_lorax   2.2.2.1 (serial 0)   |   |   |   Outside network:   2.2.2.2      Router Configuration   version 11.3   service timestamps debug uptime   service timestamps log uptime   no service password-encryption   !   hostname the_lorax   !   enable secret 5 $1$qTEA$EiD5izUJ9cNhgKMjMLAbI/   enable password ww   !   username john password 0 doe   ! The timeout here is idle-timeout   username john autocommand access-enable host timeout 2   ip nat pool net-208 2.2.2.10 2.2.2.20 netmask 255.255.255.0   ip nat inside source list 1 pool net-208   ip nat inside source static 3.3.3.5 2.2.2.25   ip nat inside source static 3.3.3.4 2.2.2.24   !   !   interface Ethernet0   ip address 3.3.3.1 255.255.255.0   ip nat inside   no mop enabled   !   interface Ethernet1   no ip address   shutdown   !   interface Serial0   ip address 2.2.2.1 255.255.255.0   ip access-group 102 in   ip nat outside   no ip mroute-cache   no fair-queue   clockrate 125000   !   interface Serial1   no ip address   shutdown   !   access-list 1 permit 3.3.3.0 0.0.0.255   access-list 102 permit tcp any host 2.2.2.1 eq telnet log-input   ! The timeout here is absolute timeout   access-list 102 dynamic testlist timeout 5 permit ip any host 2.2.2.24 log-input   !   !   line con 0   line aux 0   line vty 0 4   password ww   login local   !   end 文章录入:csh    责任编辑:csh 
  • 全部评论(0)
联系客服
客服电话:
400-000-3129
微信版

扫一扫进微信版
返回顶部